New Panasonic Toughbook Imaging Bundles Available For Download NOW (Updated)

By | December 31, 2012
Share

UPDATE 2018/03/09: Use this link http://panasonicdeployment.com

UPDATE 2016/10/10: Use this link https://drive.google.com/open?id=0B_636cnOwn0jelIwcTFSdXBYaVE to download the latest OCBs.

— Fixed Bundles URL (May 1, 2013)

In some Panasonic Toughbook models upwards of 15 utilities are required to be installed to function properly. Add in some optional components, such as Wireless WAN Connectivity, GPS, and a Barcode Reader, and we could be in the neighborhood of 20-30 required installs. These “bundles” were produced to greatly simplify all of these mandatory installs.

Bundles Pros:

  1. ONE install step per Model/Mark (19A – Mk5)
  2. Logs all activity to single file (C:\Windows\Temp\Pana….log)
  3. Works with all Imaging Suites (SCCM, MDT2010/2012, LANDesk, KACE, Altiris, etc.)
  4. Supported and Produced by Panasonic.
  5. Installs and Drivers are NOT Re-Packaged or Re-Engineered.

Cons:

  1. Does not include Storage or LAN drivers, these must be downloaded from Intel (http://downloadcenter.intel.com/)
  2. Added into Imaging Suites, yet managed on File level (.ZIP file names in SRC\ folders dictate what and when they are installed)

See the following .PDF for assistance in downloading and utilizing the bundles.

Updated URL – 5/1/2013
https://panaconsulting.egnyte.com/publicController.do?folderName=20130501&fileName=02ce201186d84d71

Feedback is encouraged! (Comment here or email my team at imaging@us.panasonic.com)

Temp3

2013Jan08-RunningBundleInSCCM2012

 

 

-BG

39 thoughts on “New Panasonic Toughbook Imaging Bundles Available For Download NOW (Updated)

    1. Nicholas Vincent

      Can someone send me the Bundle Help document used to edit the bundle and pack it back? I have been out of Panasonic rotation for a few years and see the beautiful Google Drive site is gone. I had the documentation in OneNote but one of me teammates knew better and deleted it 🙁

      Thanks.

      Reply
        1. Nicholas

          Thank you for this. I cannot download the tools bundle it says it has a virus.

          Reply
          1. Brian Gonzalez Post author

            Nick, I assure you that its not. If your worried, disable av in a sandbox VM, download it there and then take a look.

            /Brian

  1. Gareth

    Hi Brian,
    I’ve followed your instructions to add a oneclick bundle in for the CF-19 mk7 and CF-53 mk3 into SCCM 2007. If I let the task sequence run through without the ‘continue on error’ tick, I get a task sequence error ‘0x080070002’ with nothing written to the log file at C:\windows\temp and no drivers installed. However there is nothing in the smsts.log file to suggest what the issue may be. If I let the task sequence run with ‘continue on error’ ticked, the build completes, but none of the drivers are installed. Once again the smsts.log file is no help and there is no log file at C:\windows\temp.
    Do you have any suggestions?
    Many thanks.

    Reply
      1. Michael

        this link is dead… is there a new location? or maybe just explain how you are doing it.

        Thanks!!

        Reply
  2. Gareth

    Hi Brian,
    Thanks for the reply. Yes, I believe I have added everything as detailed in the video.
    The bundle runs successfully outside of the task sequence.
    The thing that’s most frustrating is that it doesn’t appear to give any error in the smsts.log and so is not giving me much to go on.
    I was just wondering if you had ever come across this in the past?
    Thaanks agian.

    Reply
    1. Brian Gonzalez Post author

      Gareth,

      Somehow, this post made it past my radar. The log file for the bundle is in the C:\Windows\Temp directory and named as “Pana....log”

      You also can re-route the log to any location, but passing the logging folder to the:
      install.exe “C:\Temp”

      Please let me know how it goes.

      /Brian G

      Reply
  3. Ondrej

    Hi Brian,
    will bundles for B11 and NX3 be available please?
    Btw I think NX3 and SX3 can have same product value in WMI and also same drivers as it was with SX2 and NX2…I found that NXx models are referenced only on Japanese market and support is on JP website only – B11 too.

    Thank you

    Reply
    1. Brian Gonzalez Post author

      Ondrej,

      I work in the States, so I unfortunately do not get exposed to these models. I would love to make up a bundle for them though. if you had to prioritize them, which one would you want done first?

      /BrianG

      Reply
          1. Ondrej

            Thank you!
            I imported bundles to MDT but cant test it now. I had to prepare them for users very quickly and dont have spare one now unfortunately 🙁 Maybe later but thanks anyway!
            The same situation is with SX3

  4. kim

    When I check the box for the cf31 then click on download selected, I get preparing download then it stops again, I tried this on different computers/locations same results

    Reply
  5. Jesse

    The pdf “bundle help” document link seem to have changed. Do you have the new link perhaps? I am having difficulties successfully imaging the fz-g1 MK2 with SCCM 2012 R2.
    Thanks,

    Jesse Rodela

    Reply
  6. Dayne Bowe

    What is the paramater i need to pass to redirect the log files? i seem to be getting them all in the root of C drive….
    Thanks!

    Reply
    1. Brian Gonzalez Post author

      Dayne,

      I have a fix for that, but its taking time to incorporate the fix to all of the bundles. What bundle are you seeing it on, I’ll correct it. The log files being created are useless, so the fix simply removes them after the bundle is complete.

      /Brian G

      Reply
  7. john schoenstein

    Hi,
    I’m looking for the driver bundles for the fz-g1 mk1 and mk2, but all of the links I come across are dead. Is there a site to get the MDT2013 driver bundles?

    Reply
    1. Scott

      Hi Brian,

      I’m also looking for the new fz-g1 driver bundle. We just got one of the newest models in today.
      I can’t find it at the usual bundles link.

      Thanks,
      Scott

      Reply
        1. Scott

          Nope, the FZ-G1P (MK4) is not listed on that site.

          I also sent an email to Panasonic last week and Justin D got back to me and uploaded the Win7 x64 CAB and EXE to these sites:
          https://drive.google.com/drive/folders/0B_636cnOwn0jY3NOMmsyNzdpMTQ
          https://drive.google.com/drive/folders/0B_636cnOwn0jelIwcTFSdXBYaVE
          He also sent me the link to the Sierra EM7355 software: ftp://ftp.panasonic.com/computer/software/mc7355_driver_firmware_build4316_software.zip

          Unfortunately it hasn’t been super smooth.

          Using the CAB for importing the drivers into MDT seems to work okay, until the apps from the EXE are installed…from what I can tell something in the apps is breaking stuff. I’ve tried a number of things. Currently I’m importing all the drivers from the CAB, and only the bare bones apps from the EXE. (I edit the EXE with WinRAR to remove all the folders for drivers and such that I don’t need.)
          I’m just waiting for the MDT image of the test machine to finish right now.

          It’s been a bit of a headache, but hopefully this last try that I’m doing will be the one that works.

          Reply
          1. Brian Gonzalez Post author

            Scott,

            Sorry about that, I corrected the site. Please give it a refresh and let me know if you run into any issues.

            /BG

          2. Scott

            My last attempt worked!

            I loaded all the drivers from the CAB into the Injected drivers area as per normal.
            And I installed just the entries in the EXE driver pack that started with # and R. I removed all the numbered folders….most are drivers, but a few seemed to be apps as well. However removing them all has resulted in a perfect MDT image. In fact there are more Panasonic apps installed now that in any previous attempt. And that includes when I tried to just install the unedited EXE Driver pack by itself.

            I think there is a problem in the EXE driver pack G1PQR-MK4-7X64.exe. At least the NIC driver under folder 21 seems to have some kind of issue. Either you get a blank error message when installing it, or one stating that “Findreg.exe has stopped working”.

            But I’m happy. I got this working. I’m going to wipe the FZ-G1P and give it another go to make sure that the MDT process for it is 100%. 🙂

          3. Brian Gonzalez Post author

            Scott,

            That’s great news, thanks for the feedback. Let me take a look at that OCB and fix up that LAN installer.

  8. Simon

    Hello Brian Gonzalez,

    I have a similar bug with package #27 / 36 from bundle 1912-mk6-7×64 I alwayse get a findreg.exe error. Can this package be updated?

    Same as which was fixed: I think there is a problem in the EXE driver pack G1PQR-MK4-7X64.exe. At least the NIC driver under folder 21 seems to have some kind of issue. Either you get a blank error message when installing it, or one stating that “Findreg.exe has stopped working”.

    Reply
      1. Simon

        Hello seems that your bundles are more up to date. It works great!!!

        Thanks

        Reply

Leave a Reply to kim Cancel reply

Your email address will not be published.

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.